The Sonifex AVN-CU2 Commentator Unit is a Dante-enabled Commentator Unit for use by up to 2 commentators. Using Dante® AoIP together with 4 wire connections it bridges the gap between old and new technology, allowing the ease of connectivity & functionality of AoIP together with the legacy connections needed to operate with the existing infrastructure [more]
The Sonifex RB-FS42 Audio Failover Switcher is a smaller channel count version of the RB-FS82, offering a lower number of inputs and outputs. It is a more cost effective solution where failover is needed for a smaller number of sources/destinations and supports all of the features of the RB-FS82. The device has 4 main + [more]
The Sonifex RB-FS82 Audio Failover Switcher is an important tool in many critical areas in telecommunications and broadcast chains. The device has 8 main + 2 standby, stereo analogue audio, AES/EBU digital audio and RS232 connections (both inputs and outputs) and can be configured via Ethernet for two main operational applications: For switching of program [more]
The Sonifex AVN-TB20AD 20 Button Advanced Desktop Talkback Intercom is a desktop version of the rackmount AVN-TB20AR intercom with a smaller form factor and an elegant sloped front. It has the same feature set and connectivity. Product Function: An advanced talkback/listening/paging intercom unit to enable voice/audio communication between different areas in a facility or building [more]
The Sonifex AVN-TB20AR 20 Button Advanced Talkback Intercom is a 2U rackmount 20 button version of the AVN-TB10AR with the same specification, but more station buttons allowing greater communication for larger facilities. It also has ‘GPI/O’ and ‘Phone’ buttons for remote control of external equipment and Sonifex DHY-04 telephone hybrids, useful in an OB truck [more]
The Sonifex AVN-TB10AR 10 Button Advanced Talkback Intercom is an audio based talkback intercom unit with an advanced feature set, allowing them to be used in multiple applications. With both 4-wire analogue inputs and outputs, as well as AoIP network audio connectivity, the unit can be used with existing legacy 4-wire systems and with new [more]
The Sonifex PC-AD2 PCIe Half Height Sound Card is a dual stereo analogue input/output and dual stereo AES-3 digital input/output sound card in the PCIe half height format. One of the analogue inputs can be used as a dual mono or stereo mic input, there is a dedicated AES-11 sync input and also two general [more]
Sonifex can provide LED flush mount signage with your custom message.
The Auricon 4.4 is a professional quality 4 stereo input and 4 stereo output analogue PCIe audio card. The inputs and outputs can be reconfigured as separate mono channels, giving eight inputs and outputs. It is supplied with a Windows WDM driver to provide full sound card functionality under Windows XP, Server 2003, Vista, Server [more]
The AM Radcap PCIe card is a radio capture card designed for simultaneous recording of up to 32 radio stations. The frequency of each individual station may be set in software and its audio appears as a standard Windows audio input device. The AM Radcap uses a high speed analogue-to-digital converter to digitise the entire [more]
Breakout cable for the Sonifex PC-AUR44 Auricon 4.4 PCIe Analog Sound Card.
The AM Radcap PCIe card is a radio capture card designed for simultaneous recording of up to 32 radio stations. The frequency of each individual station may be set in software and its audio appears as a standard Windows audio input device. The AM Radcap uses a high speed analogue-to-digital converter to digitise the entire [more]
The Net-Log is a new way to record and play audio. The Net-Log overcomes the inherent unreliability of PCs for long-term recording by providing a dedicated hardware recording platform that uses a simple network connection for audio playback. Playback software on a network connected PC streams the audio to the desktop where it can be [more]
The Digitorc 4 has four AES-3 stereo input and output channels on a Windows platform and is fully compatible with the Wave, DirectSound, DirectShow, MCI and Core Audio APIs. On the card is implemented both a single lane bus-master PCIe interface and four x 24-bit AES-3 codecs. Independent asynchronous sampling rate conversion on the inputs [more]
The AM Radcap PCIe card is a radio capture card designed for simultaneous recording of up to 32 radio stations. The frequency of each individual station may be set in software and its audio appears as a standard Windows audio input device. The AM Radcap uses a high speed analogue-to-digital converter to digitise the entire [more]
The RB-AEC 1U rack-mount is an acoustic echo canceller primarily designed for the benefit of studio personnel for television and radio. When a studio presenter’s microphone signal is played out through a monitor speaker in the control room, it can be picked up by the control room microphone(s) and returned to the presenter’s earpiece as [more]
Breakout cable for the Sonifex PC-DIG4 Digitorc 4, 4 Stereo AES-3 I/O PCIe Sound Card
The AM Radcap PCIe card is a radio capture card designed for simultaneous recording of up to 32 radio stations. The frequency of each individual station may be set in software and its audio appears as a standard Windows audio input device. The AM Radcap uses a high speed analogue-to-digital converter to digitise the entire [more]
The DHY-04 telephone hybrid is an enhanced redesign of the DHY-03, the best performing telephone hybrid in the world. It now has auto-sensing combined analogue and AES/EBU inputs and outputs, front panel speed dial buttons, together with an Ethernet interface to allow web browser access to the configuration and internal settings. All whilst still retaining [more]
The PCIe DAB+/DAB radio capture card receives and decodes the entire contents of up to four DAB+/DAB ensembles, rendering each audio service as a virtual Windows audio capture device for use with multi-channel recording or monitoring software. Broadcast data services, including DLS text and MOT slideshows, are also available through a simple application programming interface. [more]
The AM Radcap PCIe card is a radio capture card designed for simultaneous recording of up to 32 radio stations. The frequency of each individual station may be set in software and its audio appears as a standard Windows audio input device. The AM Radcap uses a high speed analogue-to-digital converter to digitise the entire [more]
The DHY-04S 1U rackmount telephone hybrid is an enhanced redesign of the DHY-03, the best performing telephone hybrid in the world. It now has auto-sensing combined analogue and AES/EBU inputs and outputs, front panel speed dial buttons, together with an Ethernet interface to allow web browser access to the configuration and internal settings. All whilst [more]
The PCIe DAB+/DAB radio capture card receives and decodes the entire contents of up to four DAB+/DAB ensembles, rendering each audio service as a virtual Windows audio capture device for use with multi-channel recording or monitoring software. Broadcast data services, including DLS text and MOT slideshows, are also available through a simple application programming interface. [more]
The AM Radcap PCIe card is a radio capture card designed for simultaneous recording of up to 32 radio stations. The frequency of each individual station may be set in software and its audio appears as a standard Windows audio input device. The AM Radcap uses a high speed analogue-to-digital converter to digitise the entire [more]
The DHY-04T 1U rackmount twin telephone hybrid is an enhanced redesign of the DHY-03 , the best performing telephone hybrid in the world. It now has auto-sensing combined analogue and AES/EBU inputs and outputs, front panel speed dial buttons, together with an Ethernet interface to allow web browser access to the configuration and internal settings. [more]
The PCIe DAB+/DAB radio capture card receives and decodes the entire contents of up to four DAB+/DAB ensembles, rendering each audio service as a virtual Windows audio capture device for use with multi-channel recording or monitoring software. Broadcast data services, including DLS text and MOT slideshows, are also available through a simple application programming interface. [more]
The AM Radcap PCIe card is a radio capture card designed for simultaneous recording of up to 32 radio stations. The frequency of each individual station may be set in software and its audio appears as a standard Windows audio input device. The AM Radcap uses a high speed analogue-to-digital converter to digitise the entire [more]
The DHY-04CON is a front panel conversion kit, changing the DHY-04S to a DHY-04.
The PCIe DAB+/DAB radio capture card receives and decodes the entire contents of up to four DAB+/DAB ensembles, rendering each audio service as a virtual Windows audio capture device for use with multi-channel recording or monitoring software. Broadcast data services, including DLS text and MOT slideshows, are also available through a simple application programming interface. [more]
The DHY-04SCON is a front panel conversion kit, changing the DHY-04 to a DHY-04S.
The PCIe DAB+/DAB radio capture card receives and decodes the entire contents of up to four DAB+/DAB ensembles, rendering each audio service as a virtual Windows audio capture device for use with multi-channel recording or monitoring software. Broadcast data services, including DLS text and MOT slideshows, are also available through a simple application programming interface. [more]
The DHY-04TCON is a front panel conversion kit, changing two DHY-04 free standing units, or two DHY-04S units to a DHY-04T.
The FM Radcap PCIe is a radio capture card designed for simultaneous recording of multiple radio stations. The frequency of each station is set in software and its audio appears as a standard Windows audio input device. RDS decoding is also supported. The card uses a high-speed A/D converter to digitise the entire FM band, [more]
A new addition to the DHY-04 range is the ability for the DHY-04G version to be used on a GSM cellular (mobile) phone network instead of a telephone (POTS) line. The DHY-04G can accept a SIM card in the rear panel slot and by connecting a suitable GSM antenna, the DHY-04G can receive and make [more]
The FM Radcap PCIe is a radio capture card designed for simultaneous recording of multiple radio stations. The frequency of each station is set in software and its audio appears as a standard Windows audio input device. RDS decoding is also supported. The card uses a high-speed A/D converter to digitise the entire FM band, [more]
A new addition to the DHY-04 range is the ability for the DHY-04GS , a 1U rackmount telephone hybrid version, to be used on a GSM cellular (mobile) phone network instead of a telephone (POTS) line. The DHY-04G can accept a SIM card in the rear panel slot and by connecting a suitable GSM antenna, [more]
The FM Radcap PCIe is a radio capture card designed for simultaneous recording of multiple radio stations. The frequency of each station is set in software and its audio appears as a standard Windows audio input device. RDS decoding is also supported. The card uses a high-speed A/D converter to digitise the entire FM band, [more]
A new addition to the DHY-04 range is the ability for the DHY-04GT, a 1U rackmount twin telephone hybrid version, to be used on a GSM cellular (mobile) phone network instead of a telephone (POS) line. The DHY-04G can accept a SIM card in the rear panel slot and by connecting a suitable GSM antenna, [more]
The FM Radcap PCIe is a radio capture card designed for simultaneous recording of multiple radio stations. The frequency of each station is set in software and its audio appears as a standard Windows audio input device. RDS decoding is also supported. The card uses a high-speed A/D converter to digitise the entire FM band, [more]
The DHY-04GCON is a front panel conversion kit, changing the DHY-04GS to a DHY-04G.
The FM Radcap PCIe is a radio capture card designed for simultaneous recording of multiple radio stations. The frequency of each station is set in software and its audio appears as a standard Windows audio input device. RDS decoding is also supported. The card uses a high-speed A/D converter to digitise the entire FM band, [more]
The DHY-04GSCON is a front panel conversion kit, changing the DHY-04G to a DHY-04GS .
The FM Radcap PCIe is a radio capture card designed for simultaneous recording of multiple radio stations. The frequency of each station is set in software and its audio appears as a standard Windows audio input device. RDS decoding is also supported. The card uses a high-speed A/D converter to digitise the entire FM band, [more]
The DHY-04GTCON is a front panel conversion kit, changing two DHY-04G free standing units, or two DHY-04GS units to a DHY-04GT.
The FM Radcap PCIe is a radio capture card designed for simultaneous recording of multiple radio stations. The frequency of each station is set in software and its audio appears as a standard Windows audio input device. RDS decoding is also supported. The card uses a high-speed A/D converter to digitise the entire FM band, [more]
f you add another RB-OA3 to an existing unit to expand either the number of busses or studios, you need additional cables to connect it which are contained in this kit: 1 x Transmission output expansion cable, 25 pin D-type male to 25 pin D-type male, 30cm lead, wired pin to pin. 1 x LSO [more]
The CM-CU21TP is a Commentator Unit Transport Case which can be used with the CM-CU21 or the CM-CU1. The CM-CU21TP case is sold empty.
The PS-SEND is a freestanding audio to IP converter which is also available in a 1U rack-mount as the PS-SENDS. It receives audio from a number of user selectable external stereo sources including balanced and unbalanced analogue audio, AES/EBU, S/PDIF & TOSlink digital audio. Once an audio source is selected, the unit encodes the audio [more]
The RB-LC3 is a triple output switching unit for controlling external mains indicators, primarily studio status lights for broadcasting applications, such as On-Air, Mic-Live and Rehearsal/Live lights. Each output can be individually controlled by one of three remote inputs (pulled high, or low), by a telephony input (when ringing, or off-hook, or both), or a [more]
The CM-TBU line-powered telephone balance unit is compatible with all analogue direct exchange lines and provides a 4-wire communications system to interface with the telephone network. The high degree of separation between send and receive signals makes it suitable for use in telephone IFB (interrupted foldback) applications and the high drive capacity at the 4-wire [more]
The PS-PLAY is a freestanding IP to audio converter which is also available in a 1U rack-mount as the PS-PLAYS. It takes an IP audio feed and converts it to a number of simultaneous stereo outputs: balanced and unbalanced analogue audio, AES/EBU, S/PDIF & TOSlink digital audio outputs. As for the PS-SEND, all the configuration [more]
Whenever programming originates from outside of the studio, or if listeners/viewers are calling up a phone-in using telephone hybrids or codecs, mix-minus feeds are required. Most telephone lines incur delays which prohibit off-air monitoring, because the caller, or remote talent, would hear their own voice in delay which is very disconcerting. The solution is to [more]
The CM-TLL provides a low-loss interface to receive audio from a telephone line. The line-powered unit is compatible with all analogue direct exchange lines and includes an LED indication of incoming calls. The unit is intended to be used with an earpiece amplifier to receive an audio feed by telephone from a studio. The line [more]
The RB-MTV1 contribution voiceover monitor is a 1U rack-mount designed to be used in voice-over booths, news booths, commentary locations, for continuity announcements and for any other similar applications where voice needs to be added to programme content and then monitored. Programme feeds, auxiliary feeds and a talkback feed can be taken and monitored. The [more]
The HY-03DTD is a dial tone detect add-on board for the HY-03 range of products. As standard, the HY-03 range can automatically disconnect the line once K-break is sensed.
For rack mounting smaller (28cm) (11”) units the optional RB-RK1 (Red) or RB-RK1B (Black) kit can be used (which include 4 off M6 panel fixing screws). The RB-RK1 can be used with the following products:- RB-UL2 Dual unbalanced to balanced converter RB-BL2 Unbalanced to balanced bi-directional converter RB-PA2 Dual stereo RIAA phono amplifier RB-LI2 Stereo [more]
The HY-03CON is a front conversion panel kit changing the HY-03S 19″ (48cm) rack unit to a HY-03 free standing unit.
For rack mounting smaller (28cm) (11”) units the optional RB-RK1 (Red) or RB-RK1B (Black) kit can be used (which include 4 off M6 panel fixing screws). The RB-RK1 can be used with the following products:- RB-UL2 Dual unbalanced to balanced converter RB-BL2 Unbalanced to balanced bi-directional converter RB-PA2 Dual stereo RIAA phono amplifier RB-LI2 Stereo [more]
The HY-03SCON is a front conversion panel kit changing the HY-03 free standing unit to a HY-03S 19″ (48cm) rack unit.
RB-RK2 1U rear panel rack kit for small Redbox range, e.g., RB-BL2. For rear panel mounting you can use either the RB-RK2, or RB-RK3, depending on the size of your Redbox.
The HY-03TCON is a front conversion panel kit changing the HY-03 free standing unit or the HY-03S, to a HY-03T 19″ (48cm) rack unit .
1U rear panel rack kit for large Redbox range, e.g., RB-DA6. For rear panel mounting you can use either the RB-RK2, or RB-RK3, depending on the size of your Redbox.
The DHY-03EC eurocard single digital telephone hybrid uses the same technology as the DHY-03 but is based in a card-style format for installation in a eurocard rack frame, or in certain broadcast mixers. Eurocards are supplied without a power supply, or casing, and are therefore significantly cheaper than the other units. It is pin compatible [more]
A number of customers have asked for non-rackable fronts for the RB-HD1, RB-HD2, RB-ADDA, RB-UL4, RB-BL4 and RB-LU4. The RB-FR1 is front panel, no 19†mount, for RB-ADDA, RB-UL4, RB-BL4 & RB-LU4.
The DHY-03CON is a front panel conversion kit, changing the DHY-03S to a DHY-03.
For RB-HD1 or RB-DAC1 front panel, no 19†rack mount.
The DHY-03SCON is a front panel conversion kit changing the DHY-03 free standing to a DHY-03S 19″ (48cm) rack unit.
The RB-DS2 is a stereo audio delay synchroniser used for resynchronising audio to video following delay processes such as standards conversion, transmission delay, logo insertion, video aspect ratio conversion and network delays. It can be used for fixed installations to correct a permanent audio delay, or on an intermittent basis to provide occasional correction, for [more]
For RB-HD2 front panel, no 19†rack mount.
The DHY-03TCON is a front panel conversion kit changing a DHY-03 or DHY-03S into a DHY-03T 19″ (48cm) rack unit.
The CM-CU1 offers the same high quality, robust specification as the CM-CU21, with a feature set tailored to single commentator applications. It provides a fully featured commentator position and a line-level input. The unit has an individual commentator output, with an additional output providing a mix of commentator and line input audio. A limit indicator [more]
The Mentor Time Server is software which runs on a MS-Windows XP/Vista/Windows 7™/Windows 8 PC and synchronizes a number of MS-Windows XP/Vista/Windows 7™/Windows 8 client machines or Sonifex Net-Log units to its time. The client PCs or Net-Logs read the server time and have their time set using TCP/IP at regular intervals. Mentor Server must [more]
The DHY-03CONF is a conference cable used to connect two DHY-03 units together.
The CM-TB8 is a powerful and highly flexible self contained communications unit allowing multiple 4-wires and IFBs within a single 1U rack space. It offers easy connection to any industry standard talkback system including the Sonifex CM-TLL line listen unit plus the CM-CU1 and CM-CU21 commentator units. The CM-TB8 8 Channel Talkback Control Unit is [more]
The Mentor Time Server is software which runs on a MS-Windows XP/Vista/Windows 7™/Windows 8 PC and synchronizes a number of MS-Windows XP/Vista/Windows 7™/Windows 8 client machines or Sonifex Net-Log units to its time. The client PCs or Net-Logs read the server time and have their time set using TCP/IP at regular intervals. Mentor Server must [more]
The PS-AMP is a freestanding unit which converts an IP audio stream directly to speaker outputs. It is also available in a 1U rack-mount as the PS-AMPS. The PS-AMP has the same feature-set as the PS-PLAY except that there are no individual audio outputs other than the speaker terminals. The PS-AMP uses an integrated 2 [more]
The RB-IPE is a 1U rackmount unit designed to provide remote control of GPIO and analogue control voltages over an Ethernet network. Configured using a built-in web server, two units can control each other across an Ethernet network, or a single unit can be controlled via Ethernet commands and the web server interface. The unit [more]
The Mentor Time Server is software which runs on a MS-Windows XP/Vista/Windows 7™/Windows 8 PC and synchronizes a number of MS-Windows XP/Vista/Windows 7™/Windows 8 client machines or Sonifex Net-Log units to its time. The client PCs or Net-Logs read the server time and have their time set using TCP/IP at regular intervals. Mentor Server must [more]
The PS-AMP is a freestanding unit which converts an IP audio stream directly to speaker outputs. It is also available in a 1U rack-mount as the PS-AMPS. The PS-AMP has the same feature-set as the PS-PLAY except that there are no individual audio outputs other than the speaker terminals. The PS-AMP uses an integrated 2 [more]
The RB-DS2R is a remote panel for controlling up to 4 separate RB-DS2 units from a single 1U 19” rack-mount panel. The unit has 4 rotary switches, each with 8 available selections numbered 0 to 7, used for selecting the delay time in frames. On the rear of the unit are 4 x 15-way D-type [more]
The Mentor Time Server is software which runs on a MS-Windows XP/Vista/Windows 7™/Windows 8 PC and synchronizes a number of MS-Windows XP/Vista/Windows 7™/Windows 8 client machines or Sonifex Net-Log units to its time. The client PCs or Net-Logs read the server time and have their time set using TCP/IP at regular intervals. Mentor Server must [more]
The PS-PLAY is a freestanding IP to audio converter which is also available in a 1U rack-mount as the PS-PLAYS. It takes an IP audio feed and converts it to a number of simultaneous stereo outputs: balanced and unbalanced analogue audio, AES/EBU, S/PDIF & TOSlink digital audio outputs. As for the PS-SEND, all the configuration [more]
The RB-OA3 has been designed for installation in a central technical area with cabling to custom panels, or selection switches, in each studio. If you don’t have any custom switch panels available, you can use an RB-OA3R in each studio. The RB-OA3R is a 1U rack mount switch unit for use in each studio that [more]
The CM-CU21CP is a front cover plate for the CM-CU21 Commentator Unit.
The PS-PLAY is a freestanding IP to audio converter which is also available in a 1U rack-mount as the PS-PLAYS. It takes an IP audio feed and converts it to a number of simultaneous stereo outputs: balanced and unbalanced analogue audio, AES/EBU, S/PDIF & TOSlink digital audio outputs.As for the PS-SEND, all the configuration settings [more]
The RB-PD2 is a stereo audio profanity delay used for live broadcast programs to prevent unwanted or obscene material from being transmitted. It features an automatic audio stretch algorithm that allows between 2 and 55 (*) seconds of delay to be built up live whilst “on air”, whilst maintaining the correct pitch. The delay can [more]
The RB-DD4 4 channel digital audio delay allows you to delay 4 mono channels of audio independently or together. Each channel delay is user selectable from multiples of common video frame rates, or a user defined value set via the serial interface. The unit is perfect for synchronizing audio to video which has been delayed [more]
The TB-6D and TB-6R are used for general talkback between studios and use DC signalling, also known as ground lifting or ground signalling, to communicate with each other. These units can be installed in various locations throughout a studio complex and linked to one another, with each unit being able to talkback to up to [more]
The TB-6D and TB-6R are used for general talkback between studios and use DC signalling, also known as ground lifting or ground signalling, to communicate with each other. These units can be installed in various locations throughout a studio complex and linked to one another, with each unit being able to talkback to up to [more]
The analogue HY-03 telephone hybrid is the replacement for the HY-02, which for many years has set the standard as an excellent value, high quality telephone hybrid.
The HY-03S is a single automatic analogue TBU, 19″ (48.3cm) rack-mount unit.
The HY-03T is a twin automatic analogue TBU, 19″ (48.3cm) rack-mount unit.
The digital DHY-03 telephone hybrid is probably the best performing digital hybrid in the world, with simply stunning line balance rejection figures. For the best sounding audio calls you’re likely to hear, you should specify the DHY-03.
The DHY-03S is a single automatic digital TBU, 19″ (48.3cm) rack-mount unit.
The DHY-03T is a twin automatic digital TBU, 19″ (48.3cm) rack-mount unit. The digital DHY-03 telephone hybrid is probably the best performing digital hybrid in the world, with simply stunning line balance rejection figures. For the best sounding audio calls you’re likely to hear, you should specify the DHY-03.
The RB-SD1 silence detection unit is a 1U rack-mount device used to monitor an unattended stereo studio feed and in the event of the signal going “quiet†after a given period the unit will switch through an alternative stereo audio signal. This signal could be a recorded message (e.g. “normal service will be resumedâ€, etc), [more]
The RB-DSD1 digital silence detection unit works in a similar way to the Sonifex RB-SD1 analogue silence detection unit, but has AES/EBU, S/PDIF and TOSlink inputs and outputs instead of analogue inputs and output respectively. Designed to switch from one input to another in the event of loss of audio, the unit is ideal at [more]
The RB-DSD8 8 channel silence switcher works in a similar way to the Sonifex RB-SD1 and RB-DSD1 but allows for 4 stereo channels of audio. These stereo audio channels can be either analogue or digital and can be used independently to give 4 stereo silence detectors or they can be linked to handle multichannel audio [more]
The RB-SS10 10 way stereo analogue source selector/mixer is a 1U rack-mount unit that produces a stereo analogue audio output from 10 selectable stereo analogue sources. There are 10 illuminated front panel push-buttons, which select and indicate the current channel selection. The selection and indication is also available through a remote connector on the rear [more]
The RB-OA3 is a 1U rack-mount, unity gain on-air switcher, capable of switching three stereo pairs between three studios. Each studio can control the transmission path together with two peripheral paths for equipment such as a codec or hybrid and there is also a “Last studio to offer†bus, allowing for seamless and continuous broadcast [more]
The RB-SM2 consists of two independent converters which will produce two fully buffered and balanced mono line outputs from two stereo inputs.
The RB-TGHD is an 8 channel audio tone generator that provides line identification for multi-channel audio systems, including 5.1 and 7.1 surround sound typically used in high definition television broadcasts. By using a range of widely accepted industry standard tone sequences such as the EBU R49, GLITS and BLITS tones, channel identification and associated levels [more]
The RB-TGHD is an 8 channel audio tone generator that provides line identification for multi-channel audio systems, including 5.1 and 7.1 surround sound typically used in high definition television broadcasts. By using a range of widely accepted industry standard tone sequences such as the EBU R49, GLITS and BLITS tones, channel identification and associated levels [more]
The Net-Log is a new way to record and play audio. The Net-Log overcomes the inherent unreliability of PCs for long-term recording by providing a dedicated hardware recording platform that uses a simple network connection for audio playback. Playback software on a network connected PC streams the audio to the desktop where it can be [more]
The CM-CU21 is a high quality, portable Commentator Unit. Its sturdy construction and flexibility of features make it suitable for use in a wide variety of environments. It provides two fully featured commentator positions and a third guest position that can alternatively be used as a line-level input. Each position has an individual output, with [more]